Installing A Water Spigot In The Garage

CraigHardy

CraigHardy

Member
Joined
Aug 2, 2020
Messages
190
Reaction score
0
Points
21
  • #1
Valentine’s day was here. I wanted to wash the car and have it nice and clean, so my lady and I could drive down to Foxwoods in style. It was pretty dirty and needed a good wash.

On my way back from tennis yesterday morning, I dreaded the idea of going downstairs, turning the water valve to “on” and then going back outside to hook up the hose on the water spigot at the front of the house. I think the part I hate the most is hooking up the hose outside and then having to unhook it to put it back in the garage. The reason I would have to go downstairs to turn the valve on is because of freezing in the winter. No valve downstairs, frozen and broken water spigot upstairs come spring.

I had a great idea. Why not install a water spigot inside the garage? This way, I can keep a hose hooked up all the time and not have to worry about the spigot freezing over the winter. I could use the spigots that are outside for watering and things like that over the summer, but for washing the car and things like that, I could use the inside one. I thought it would be very handy.

Since the area I wanted the spigot located in the garage was right on the other side of the washing machine hookups down in the basement, I figured it would be a pretty easy job. Somehow, I would just tap into the cold water feed for the washing machine. I really look forward to these types of projects because I have to get imaginative. I enjoy standing in the pluming aisle at Home Depot trying to figure things out. I really do.

Before I left for the Depot to get all the parts, I decided to drill a hole through the 2×10 that the floor was resting on. This 2×10 is up in the ceiling of the laundry room and down towards knee level in the garage. I would drill a 7/8 inch hole to see what I would find.

I drilled the hole from the basement and saw daylight. Lucky me. I went upstairs to the garage and saw a hole right where I wanted the spigot to be. Really lucky me. I started getting my thoughts together and made a little list. Then, I hopped in the car and drove over to Home Depot.

I am not going to give you the list of parts I bought here because I forget what they are. Hopefully you can see them in the pictures I will show you. As I post the pics, I will probably remember what they were. Take a look at the finished product.

dsc01414.jpg

dsc01417.jpg

dsc01411.jpg

Let me do a little explaining. I know the proper way to do this is with copper piping. I may change that some day. For this application, I used hose. Since I am aware that this is not a permanent thing, I put an on/off valve down near the splitter in the laundry room. I saw the hose in the store and couldn’t pass it up. When I am not using the spigot, I can just go downstairs to turn the valve off.

Also, the reason the spigot is mounted to 2x4s is because I wanted it really solid on the wall. I am probably going to tug on the hose as I pull it outside and I didn’t feel like having the spigot tear off the wall. It’s not the prettiest thing, but you should try to give it a wiggle. Nope. I know there is a 2×10 on the other side of the sheetrock, but the hole I drilled was a bit too big and the mounting screws weren’t sitting right.

After everything was all set up, I hooked up a nice brand new no-kink garden hose I bought last autumn to the spigot in the garage. I went downstairs to turn on the easily accessible on/off valve and then came back upstairs to drag the hose out into the driveway. I turned the spigot on and…well, that’s for the next post.
 
EmeraldHike

EmeraldHike

Member
Joined
Aug 8, 2020
Messages
85
Reaction score
0
Points
11
  • #2
By spicket, I think you mean spigot, which is also known as a faucet, valve or tap.
 
CraigHardy

CraigHardy

Member
Joined
Aug 2, 2020
Messages
190
Reaction score
0
Points
21
  • #3
EmeraldHike said:
By spicket, I think you mean spigot, which is also known as a faucet, valve or tap.
Ah, very smart! Who said anything about a spicket? haha. To think, I even Googled that word before I started writing and saw all sorts of references about spickets. Take a look at spicket in Google images. I corrected my mistake in the above post. Thank you.
 
JodyBuchanan

JodyBuchanan

Member
Joined
Aug 3, 2020
Messages
84
Reaction score
0
Points
11
  • #4
Direct link to the next post? Can’t seem to find it and was looking at doing something similar in my garage for cleanup and swamp cooler hookup.
 
Installing A Water Spigot In The Garage was posted on 08-22-2021 by CraigHardy in the Home Forum forum.

Forum statistics

Threads
523
Messages
1,665
Members
38
Latest member
[email protected]
Site by Gaulard.com.
Top